Crafts experience

〜I built a motorcycle based on Prince's "Purple Rain" in Japan, so I'll show you the process of making it.〜

English edition

Build a Prince’s “Purple Rain” motorcycle CM400T in Japan（No. 15）~English edition~

投稿日：2026年3月3日 更新日：



I’m building a motorcycles for Prince “Purple Rain”（No. 15）

☆Click here for the First article ☆
☆Click here for the completed motorcycle☆

Continuation of cowling production.　Since the plating of the side blinker had deteriorated, I decided to put a plating sheet on it.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Lightly sand the whole thing.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

I tried pasting the plated sheet, but the corner part can’t be pasted well.　Trial and error, but crumpled.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

I decided to give up the plated sheet and paint it with silver.　Scrape off the plated part to remove the step.　I use instant glue instead of putty.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

I blew primer, blew surfacer, and painted silver.　Finally, it is completed by blowing clear.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

 

プリンスパープルレイン　バイク　prince purplerain　motorcycle

I will stick the plated molding to the whole cowling.　Plating molding（8mm） is for cars.　Bend the mall using a hair dryer.

Secure the mall with clothespins using glue.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

The corner part is difficult to paste the molding.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

It took 2 days to attach the mall.　The glue has protruded, so something has to be done.

Also clean the base of the horn and handlebars.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

 

プリンスパープルレイン　バイク　prince purplerain　motorcycle

 

I lost the clip that fixes the headlight, so I made my own.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Covers are attached to the left and right pockets inside the cowling.

 

プリンスパープルレイン　バイク　prince purplerain　motorcycle

The side blinker is completed.　It’s not plated, but it’s beautiful.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Basic cowling work completed.　The rest is mounting the shield and polishing the painted surface.



～archive～
☆Click here for the completed motorcycle☆
Build a Prince’s “Purple Rain” motorcycle㉑
Build a Prince’s “Purple Rain” motorcycle⑳
Build a Prince’s “Purple Rain” motorcycle⑲
Build a Prince’s “Purple Rain” motorcycle⑱
Build a Prince’s “Purple Rain” motorcycle⑰
Build a Prince’s “Purple Rain” motorcycle⑯
Build a Prince’s “Purple Rain” motorcycle⑮
Build a Prince’s “Purple Rain” motorcycle⑭
Build a Prince’s “Purple Rain” motorcycle⑬
Build a Prince’s “Purple Rain” motorcycle⑫
Build a Prince’s “Purple Rain” motorcycle⑪
Build a Prince’s “Purple Rain” motorcycle⑩
Build a Prince’s “Purple Rain” motorcycle⑨
Build a Prince’s “Purple Rain” motorcycle⑧
Build a Prince’s “Purple Rain” motorcycle⑦
Build a Prince’s “Purple Rain” motorcycle⑥
Build a Prince’s “Purple Rain” motorcycle⑤
Build a Prince’s “Purple Rain” motorcycle④
Build a Prince’s “Purple Rain” motorcycle③
Build a Prince’s “Purple Rain” motorcycle②
Build a Prince’s “Purple Rain” motorcycle①

-English edition

執筆者：

comment

Your email address will not be published. Required fields are marked *

CAPTCHA


関連記事

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Build a Prince’s “Purple Rain” motorcycle CM400T in Japan（No. 21）~English edition~

I’m building a motorcycles for Prince “Purple Rain”（No. 21） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ It’s been two years since I started making motorcycles, but this is the end. This time I polished the exterior and installed the front screen. Hand polish the abrasive. Rough abrasive on the left.    Fine abrasive on the right Polished and cleaned. Also polish the cowling. The scenery is reflected. Correction of plating molding of cowling Install the front shield. Cool！ Wearing a seat made with difficulty.   ～archive～ ☆Click here for the completed motorcycle☆ Build a …

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Build a Prince’s “Purple Rain” motorcycle CM400T in Japan（No. 2）~English edition~

I’m building a motorcycles for Prince “Purple Rain”（No. 2） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ Makes the CM400T closer to Prince’s “Purple Rain” motorcycle shape.　As for future work plans… ① Remove the rust from the frame and repaint. ② Remove the rust from the wheel and repaint it. ③ Lower the engine and overhaul the upper part. ④ Overhaul the front fork. ⑤ Modify the cowling to make it closer to the shape of “Purple Rain”. ⑥Repainting of the exterior This article will be from ①to ④. I painted the frame first.   …

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Build a Prince’s “Purple Rain” motorcycle CM400T in Japan（No. 11）~English edition~

I’m building a motorcycles for Prince “Purple Rain”（No. 11） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ This time, we processed the stay of the sissy bar and adjusted the mounting. Above is the previous state.　The shape is different from “Purple Rain”, so I made it with a new iron plate. I cut the previous stay by myself, but the shape was not good. The stay I made this time is sharper than before. It’s also lightweight. Drill holes for mounting. The main body is also cut a little so that the stay does not …

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Build a Prince’s “Purple Rain” motorcycle CM400T in Japan（No. 6）~English edition~

I’m building a motorcycles for Prince “Purple Rain”（No. 6）※painting failed. ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ I painted on a sunny day. However, the painting failed.　I failed, but I will introduce the process. I thought about various things to draw the symbol mark of Prince.　I cut it out using the “cutter compass”. I made a symbol mark using masking tape. It was difficult to cut out the round part. The shape of this symbol is slightly different between the “Purple Rain” photo and the bike on display at Paisley Park.　Maybe there are two. …

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Build a Prince’s “Purple Rain” motorcycle CM400T in Japan（No. 19）~English edition~

I’m building a motorcycles for Prince “Purple Rain”（No. 19） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ From this time, it is the production of the epidermis of the seat.　It’s my first experience, so I’m not sure if it will work. It is a fake leather seat.  I bought a large size for motorcycles on Amazon. This fabric is thick enough and flexible. Roughly cut the sheet according to the seat base. Prepare a black string and double-sided tape. Place the string on the thin cloth and sandwich it with double-sided tape. It’s called a …

PREV
Build a Prince's "Purple Rain" motorcycle CM400T in Japan（No. 14）~English edition~
NEXT
Build a Prince's "Purple Rain" motorcycle CM400T in Japan（No. 16）~English edition~