I’m building a motorcycles for Prince “Purple Rain”（No. 18）
☆パープルレインバイク製作①はこちら☆
☆Click here for the completed motorcycle☆
↑Everyone’s favorite “Crystal Ball”
I learned about the existence of an unreleased sound source collection called “Crystal Ball” and got it from a friend who won an auction when I was a student.
I was reminded of the height of Prince’s creativity.
This article was written four years after Prince died. The early The time has passed.
Well, the continuation of the motorcycle production.
I noticed that the angle of the seat backrest was skewed.
Now that the plating of the sissy bar is complete, it’s time to readjust the fittings and secure them to the seat base.
I asked the contractor who requested the plating of the engine guard 10 years ago. The plating was of very high quality.
Weld marks are no longer visible.
Sissy bar is like new.
Fix the seat base. Peel off the FRP, adjust the angle, and re-solidify with FRP.
It’s dirty, but it’s not visible, so it’s okay.
I sandwiched it with a magnet so that the FRP sticks.
I thought the thickness of the sheet was thin, so I added a sponge. The “Purple Rain” sheet is thicker than the CM400T stock.
I think I’m finally in good shape.
It’s behind the seat. Sponges are scattered on the ground.
Next, since the surface of the sheet is uneven, stick a thin sponge sheet（5㎜） on the entire surface.
Cut and paste the tight corners.
Near completion.
I put it on my motorcycle. I think it’s a good shape. Next time, we will apply the seat skin.
See you next time.
～archive～
☆Click here for the completed motorcycle☆
Build a Prince’s “Purple Rain” motorcycle㉑
Build a Prince’s “Purple Rain” motorcycle⑳
Build a Prince’s “Purple Rain” motorcycle⑲
Build a Prince’s “Purple Rain” motorcycle⑱
パープルレインバイク製作⑰
パープルレインバイク製作⑯
パープルレインバイク製作⑮
パープルレインバイク製作⑭
パープルレインバイク製作⑬
パープルレインバイク製作⑫
パープルレインバイク製作⑪
パープルレインバイク製作⑩
パープルレインバイク製作⑨
パープルレインバイク製作⑧
パープルレインバイク製作⑦
パープルレインバイク製作⑥
パープルレインバイク製作⑤
パープルレインバイク製作④
パープルレインバイク製作③
パープルレインバイク製作②
パープルレインバイク製作①
