I’m building a motorcycles for Prince “Purple Rain”(No. 14)
☆パープルレインバイク製作①はこちら☆
☆Click here for the completed motorcycle☆
I thought there was no part to fix the headlight lens, but there was.
It seems to cover this ring from the top of the lens and fix it with a screw. I didn’t know this method last time.
Finally, attach the headlight to the cowling. Mask the cowling so that it is not damaged.
It has a unique retro feel not found in recent motorcycles. It’s like a living creature.
Next, install the side blinkers. This “Windjammer 2” had a side blinker in front, but it will be moved to the rear.
Various parts are different from the cowling of “Purple Rain”.
Install the removed side blinker at this position.
Drill a hole where it will be installed.
The turn signal does not light up due to poor contact. After repeated trial and error, it turned on.
It became like “Purple Rain”. It became like the motorcycle in “Purple Rain”.
It also cleans the speed warning lights. But it’s just a decoration.
We will remodel the seat purchased at the auction. Using FRP, remodeled to the seat shape of “Purple Rain”.
Place the curing tape on the pattern paper and paste the FRP on it. It was cold in the winter, so I used the stove to speed up the curing.
It becomes very hard.
~archive~
☆Click here for the completed motorcycle☆
Build a Prince’s “Purple Rain” motorcycle㉑
Build a Prince’s “Purple Rain” motorcycle⑳
Build a Prince’s “Purple Rain” motorcycle⑲
Build a Prince’s “Purple Rain” motorcycle⑱
Build a Prince’s “Purple Rain” motorcycle⑰
Build a Prince’s “Purple Rain” motorcycle⑯
Build a Prince’s “Purple Rain” motorcycle⑮
Build a Prince’s “Purple Rain” motorcycle⑭
パープルレインバイク製作⑬
パープルレインバイク製作⑫
パープルレインバイク製作⑪
パープルレインバイク製作⑩
パープルレインバイク製作⑨
パープルレインバイク製作⑧
パープルレインバイク製作⑦
パープルレインバイク製作⑥
パープルレインバイク製作⑤
パープルレインバイク製作④
パープルレインバイク製作③
パープルレインバイク製作②
パープルレインバイク製作①