Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in japan- No. 12

prince-purple-rain-motorcycle-honda-cm400-build

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in japan- No. 20

I’m building a motorcycles for Prince “Purple Rain”（No. 20） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ This time the sheet is complete. This time, I painted the diamond mark on the seat and covered the seat. It turned bright red. Sew in a diamond shape.　Sew with the sponge in between. The surface was wrinkled. It’s behind the seat base. I sprayed it with a rust preventative. Add molding to the edges to prevent the sheet from tearing. Cover with vinyl to prevent water from entering. It is difficult to stretch the sheet. It’s …

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in japan- No. 13

I’m building a motorcycles for Prince “Purple Rain”（No. 13） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ Last time I made a sissy bar and cowling stay.　I installed a spacer because there was a gap between the sissy bar stay and the main body. Fits without gaps.　The sissy bar fitting is now complete.　After that, just send it to the plating shop. Cut the excess part of the cowl stay to give a sharp impression. Install headlights.　Ported from the conventional cowling. The shape of the light stay differs depending on the type of “Windjammer”.　The “Windjammer 4” …

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in japan- No. 19

I’m building a motorcycles for Prince “Purple Rain”（No. 19） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ From this time, it is the production of the epidermis of the seat.　It’s my first experience, so I’m not sure if it will work. It is a fake leather seat. I bought a large size for motorcycles on Amazon. This fabric is thick enough and flexible. Roughly cut the sheet according to the seat base. Prepare a black string and double-sided tape. Place the string on the thin cloth and sandwich it with double-sided tape. It’s called a …

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in japan- No. 21

I’m building a motorcycles for Prince “Purple Rain”（No. 21） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ It’s been two years since I started making motorcycles, but this is the end. This time I polished the exterior and installed the front screen. Hand polish the abrasive. Rough abrasive on the left. Fine abrasive on the right Polished and cleaned. Also polish the cowling. The scenery is reflected. Correction of plating molding of cowling Install the front shield. Cool！ Wearing a seat made with difficulty. ～archive～ ☆Click here for the completed motorcycle☆ Building a …

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in japan- No. 16

I’m building a motorcycles for Prince “Purple Rain”（No. 16） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ I’m going to start making sheets now. I don’t have confidence in sheet production.　But I want to make it as I imagined it, so I will do my best to make it myself. Remodeled based on a used broken seat. As a result of thinking about what to do with the frame, I decided to make it a carbon pipe.　I bought it on Amazon. Fix the carbon pipe with FEP.　Mask the motorcycle so that the FRP does not …

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in japan- No. 12

I’m building a motorcycles for Prince “Purple Rain”（No. 12）