Crafts experience

〜I built a motorcycle based on Prince's "Purple Rain" in Japan, so I'll show you the process of making it.〜

English edition

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 19

投稿日：2026年3月3日 更新日：



I’m building a motorcycles for Prince “Purple Rain”（No. 19）

☆Click here for the First article ☆
☆Click here for the completed motorcycle☆

From this time, it is the production of the epidermis of the seat.　It’s my first experience, so I’m not sure if it will work.

It is a fake leather seat.  I bought a large size for motorcycles on Amazon.

This fabric is thick enough and flexible.

Roughly cut the sheet according to the seat base.

Prepare a black string and double-sided tape.

Place the string on the thin cloth and sandwich it with double-sided tape.

It’s called a “piping code”.

Sew across the “piping cord”.　It took a long time.

I managed to take shape.　It took about 5 days.

Tight corners are cut into the “piping cord”.

The edge of the seat is sewn with 3 pieces of fabric.

I sewed it cleanly.

↑This is how you sew.

Prince Purple Rain motorcycle replica Honda CM400T

I added a sponge to the part where the thickness was not enough.

There is a diamond mark on the “Purple Rain” sheet, so reproduce it.　Place the sponge between the pieces of fabric and sew them together.

There is a wrinkle in the fabric, so I will fix it.

Sew the pinched part.

No more wrinkles.

The sheet of “Purple Rain” is reproduced because it has seams in the back.

Sew the cut fabric.

Next time, we will put a diamond mark on the sheet.

☕️ Support This Project

Thank you so much for reading to the end!
This Prince’s “Purple Rain” motorcycle replica was completed after 2 years of hard work in Japan.
If you enjoyed this restoration journey and want to help me keep this English blog alive, please consider buying me a coffee. Your support means the world to me!



⚡️ Buy me a coffee 



～archive～
☆Click here for the completed motorcycle☆
Building a Prince’s “Purple Rain” motorcycle Replica㉑
Building a Prince’s “Purple Rain” motorcycle Replica⑳
Building a Prince’s “Purple Rain” motorcycle Replica⑲
Building a Prince’s “Purple Rain” motorcycle Replica⑱
Building a Prince’s “Purple Rain” motorcycle Replica⑰
Building a Prince’s “Purple Rain” motorcycle Replica⑯
Building a Prince’s “Purple Rain” motorcycle Replica⑮
Building a Prince’s “Purple Rain” motorcycle Replica⑭
Building a Prince’s “Purple Rain” motorcycle Replica⑬
Building a Prince’s “Purple Rain” motorcycle Replica⑫
Building a Prince’s “Purple Rain” motorcycle Replica⑪
Building a Prince’s “Purple Rain” motorcycle Replica⑩
Building a Prince’s “Purple Rain” motorcycle Replica⑨
Building a Prince’s “Purple Rain” motorcycle Replica⑧
Building a Prince’s “Purple Rain” motorcycle Replica⑦
Building a Prince’s “Purple Rain” motorcycle Replica⑥
Building a Prince’s “Purple Rain” motorcycle Replica⑤
Building a Prince’s “Purple Rain” motorcycle Replica④
Building a Prince’s “Purple Rain” motorcycle Replica③
Building a Prince’s “Purple Rain” motorcycle Replica②
Building a Prince’s “Purple Rain” motorcycle Replica①

-English edition

執筆者：

comment

Your email address will not be published. Required fields are marked *

CAPTCHA


関連記事

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 12

I’m building a motorcycles for Prince “Purple Rain”（No. 12） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ Finally I was able to attach the cowling to the main body.　It took time to adjust the stay side. I made a spacer because the cowling and stay interfere.　Hard styrene material. I cut it out in the shape of the contact surface of the cowli I used 3 spacers. Adequate cushioning. I drilled a hole for the bolt. I put it between the cowling and the stay. The cowling and stay are attached with 4 bolts.　It’s made of …

prince-purple-rain-motorcycle-honda-cm400-build

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 21

I’m building a motorcycles for Prince “Purple Rain”（No. 21） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ It’s been two years since I started making motorcycles, but this is the end. This time I polished the exterior and installed the front screen. Hand polish the abrasive. Rough abrasive on the left.    Fine abrasive on the right Polished and cleaned. Also polish the cowling. The scenery is reflected. Correction of plating molding of cowling Install the front shield. Cool！ Wearing a seat made with difficulty. ☕️ Support This Project Thank you so much for reading …

prince-purple-rain-motorcycle-honda-cm400-build

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 10

I’m building a motorcycles for Prince “Purple Rain”（No. 10） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ This article is also the 10th.　This time is the production of sissy bar.　The “Purple Rain” motorcycle sissy bar has an orthodox shape. I searched for something that can be attached to CM400, but I couldn’t find it, so I modified the current sissy bar and made it. Cut the purchased iron bar and make it. decided on this form. Fix with gas burner and flux. Cannot be fixed. Failure.　I was in trouble, so I consulted my grandfather who …

prince-purple-rain-motorcycle-honda-cm400-build

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 8

I’m building a motorcycles for Prince “Purple Rain”（No. 8） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ Last time I made some mistakes, but I was able to paint the exterior in a beautiful purple color.　This time, I painted the inside of the cowling black. The cowling before painting is made of black resin. However, it will not be beautiful after 40 years, so I will paint it. I flattened the corners with putty.　There is a hole for a cigar socket, but since it is not used, it will be closed after painting. Apply a …

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 9

I’m building a motorcycles for Prince “Purple Rain”（No. 9） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ Last time I finished working on the exterior. This time it is wiring adjustment, cowling stay adjustment, sissy bar work. Wrap the wiring near the headlight with food wrap.　It is waterproof. Then wrap it in a plastic sheet for gardening. compact. The mounting position of the cowl and stay is slightly misaligned, so adjustment is required. Take a mold with aluminum foil and make a spacer. I’m thinking of a light and soft spacer. Cut off the excess …

PREV
Building Prince's Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan - No. 18
NEXT
Building Prince's Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan - No. 20