Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 12

I’m building a motorcycles for Prince “Purple Rain”（No. 12）

☆Click here for the First article ☆
☆Click here for the completed motorcycle☆

Finally I was able to attach the cowling to the main body.　It took time to adjust the stay side.

I made a spacer because the cowling and stay interfere.　Hard styrene material.

I cut it out in the shape of the contact surface of the cowli

I used 3 spacers.

Prince Purple Rain motorcycle replica Honda CM400T

Adequate cushioning.

I drilled a hole for the bolt.

I put it between the cowling and the stay.

The cowling and stay are attached with 4 bolts.　It’s made of stainless steel so it won’t rust.

Prince Purple Rain motorcycle replica Honda CM400T

I did my best to install the painted cowling.　Prince’s symbol mark stands out.

Prince Purple Rain motorcycle replica Honda CM400T

Cut and sharpen the stays.

Paint the cut part to prevent it from rusting.

☕️ Support This Project

Thank you so much for reading to the end!
This Prince’s “Purple Rain” motorcycle replica was completed after 2 years of hard work in Japan.
If you enjoyed this restoration journey and want to help me keep this English blog alive, please consider buying me a coffee. Your support means the world to me!

⚡️ Buy me a coffee