Crafts experience

〜I built a motorcycle based on Prince's "Purple Rain" in Japan, so I'll show you the process of making it.〜

English edition

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 11

投稿日：2026年3月3日 更新日：



I’m building a motorcycles for Prince “Purple Rain”（No. 11）

☆Click here for the First article ☆
☆Click here for the completed motorcycle☆

This time, we processed the stay of the sissy bar and adjusted the mounting.

Prince Purple Rain motorcycle replica Honda CM400T

Above is the previous state.　The shape is different from “Purple Rain”, so I made it with a new iron plate.

I cut the previous stay by myself, but the shape was not good.

The stay I made this time is sharper than before. It’s also lightweight.

Drill holes for mounting.

The main body is also cut a little so that the stay does not interfere.

Prince Purple Rain motorcycle replica Honda CM400T

I managed to put it on.

Next, make a sheet.

Used tattered.

The backrest is made of FRP.

Use this board as a guide.( ╹◡╹)っ📏

☕️ Support This Project

Thank you so much for reading to the end!
This Prince’s “Purple Rain” motorcycle replica was completed after 2 years of hard work in Japan.
If you enjoyed this restoration journey and want to help me keep this English blog alive, please consider buying me a coffee. Your support means the world to me!



⚡️ Buy me a coffee 



～archive～
☆Click here for the completed motorcycle☆
Building a Prince’s “Purple Rain” motorcycle Replica㉑
Building a Prince’s “Purple Rain” motorcycle Replica⑳
Building a Prince’s “Purple Rain” motorcycle Replica⑲
Building a Prince’s “Purple Rain” motorcycle Replica⑱
Building a Prince’s “Purple Rain” motorcycle Replica⑰
Building a Prince’s “Purple Rain” motorcycle Replica⑯
Building a Prince’s “Purple Rain” motorcycle Replica⑮
Building a Prince’s “Purple Rain” motorcycle Replica⑭
Building a Prince’s “Purple Rain” motorcycle Replica⑬
Building a Prince’s “Purple Rain” motorcycle Replica⑫
Building a Prince’s “Purple Rain” motorcycle Replica⑪
Building a Prince’s “Purple Rain” motorcycle Replica⑩
Building a Prince’s “Purple Rain” motorcycle Replica⑨
Building a Prince’s “Purple Rain” motorcycle Replica⑧
Building a Prince’s “Purple Rain” motorcycle Replica⑦
Building a Prince’s “Purple Rain” motorcycle Replica⑥
Building a Prince’s “Purple Rain” motorcycle Replica⑤
Building a Prince’s “Purple Rain” motorcycle Replica④
Building a Prince’s “Purple Rain” motorcycle Replica③
Building a Prince’s “Purple Rain” motorcycle Replica②
Building a Prince’s “Purple Rain” motorcycle Replica①

-English edition

執筆者：

comment

Your email address will not be published. Required fields are marked *

CAPTCHA


関連記事

prince-purple-rain-motorcycle-honda-cm400-build

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 18

I’m building a motorcycles for Prince “Purple Rain”（No. 18） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆   Well, the continuation of the motorcycle production. I noticed that the angle of the seat backrest was skewed. Now that the plating of the sissy bar is complete, it’s time to readjust the fittings and secure them to the seat base. I asked the contractor who requested the plating of the engine guard 10 years ago.　The plating was of very high quality. Weld marks are no longer visible. Sissy bar is like new. Fix the seat base.　Peel …

prince-purple-rain-motorcycle-honda-cm400-build

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 21

I’m building a motorcycles for Prince “Purple Rain”（No. 21） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ It’s been two years since I started making motorcycles, but this is the end. This time I polished the exterior and installed the front screen. Hand polish the abrasive. Rough abrasive on the left.    Fine abrasive on the right Polished and cleaned. Also polish the cowling. The scenery is reflected. Correction of plating molding of cowling Install the front shield. Cool！ Wearing a seat made with difficulty. ☕️ Support This Project Thank you so much for reading …

prince-purple-rain-motorcycle-honda-cm400-build

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 7

I’m building a motorcycles for Prince “Purple Rain”（No. 7）※paint correction. ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ Last time I failed because the red was transparent.　Since the work time is limited, I masked the symbol mark and repainted it in purple. Rub the surface with a file. This is to improve the adhesion of the paint. Clean parts with dish soap. Mask only the symbol mark. I painted only the inside of the circle purple. Then paint the other parts purple. The cowling is also masked and painted purple. This is the stage before …

Prince Purple Rain motorcycle replica Honda CM400T

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 3

I’m building a motorcycles for Prince “Purple Rain”（No. 3） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ From this time, we will proceed with the work to bring the exterior closer to the “Purple Rain” motorcycle. First, change the cowling from the current “Windjammer 4” to “Windjammer 2 or 3” and modify it. The original paint is removed and the corners are rounded.　Is the cowling material ABS?　Make a rough shape with FRP. I put a screw in the joint to reinforce it. Then put putty on the surface of FRP.　Also, in order to change the …

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 17

I’m building a motorcycles for Prince “Purple Rain”（No. 17） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ I’m having trouble making a sheet.　It’s my first initiative, and I’m making progress little by little while looking for ways to do it. Fix the carbon pipe backrest made last time to the seat base. Many layers of FRP are layered and hardened. Paste FRP on the back for reinforcement.　Originally, it would be better to make the backrest from an iron plate, but I made it from FRP because it does not fit two people and it has …

PREV
Building Prince's Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan - No. 10
NEXT
Building Prince's Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan - No. 12