Crafts experience

〜I built a motorcycle based on Prince's "Purple Rain" in Japan, so I'll show you the process of making it.〜

English edition

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 2

投稿日：2026年3月2日 更新日：



I’m building a motorcycles for Prince “Purple Rain”（No. 2）

☆Click here for the First article ☆
☆Click here for the completed motorcycle☆

Makes the CM400T closer to Prince’s “Purple Rain” motorcycle shape.　As for future work plans…
① Remove the rust from the frame and repaint.
② Remove the rust from the wheel and repaint it.
③ Lower the engine and overhaul the upper part.
④ Overhaul the front fork.
⑤ Modify the cowling to make it closer to the shape of “Purple Rain”.
⑥Repainting of the exterior
This article will be from ①to ④.

I painted the frame first.

I overhauled the front fork and installed it on the frame.

I tried lowering the engine, but it was very heavy. I’m going to overhaul the upper part from now on.

Attach the repainted wheels to the frame.

Prince Purple Rain motorcycle replica Honda CM400T

I will definitely complete it.　Please look forward to the completion.　(●´ω｀●)



～archive～
☆Click here for the completed motorcycle☆
Building a Prince’s “Purple Rain” motorcycle Replica㉑
Building a Prince’s “Purple Rain” motorcycle Replica⑳
Building a Prince’s “Purple Rain” motorcycle Replica⑲
Building a Prince’s “Purple Rain” motorcycle Replica⑱
Building a Prince’s “Purple Rain” motorcycle Replica⑰
Building a Prince’s “Purple Rain” motorcycle Replica⑯
Building a Prince’s “Purple Rain” motorcycle Replica⑮
Building a Prince’s “Purple Rain” motorcycle Replica⑭
Building a Prince’s “Purple Rain” motorcycle Replica⑬
Building a Prince’s “Purple Rain” motorcycle Replica⑫
Building a Prince’s “Purple Rain” motorcycle Replica⑪
Building a Prince’s “Purple Rain” motorcycle Replica⑩
Building a Prince’s “Purple Rain” motorcycle Replica⑨
Building a Prince’s “Purple Rain” motorcycle Replica⑧
Building a Prince’s “Purple Rain” motorcycle Replica⑦
Building a Prince’s “Purple Rain” motorcycle Replica⑥
Building a Prince’s “Purple Rain” motorcycle Replica⑤
Building a Prince’s “Purple Rain” motorcycle Replica④
Building a Prince’s “Purple Rain” motorcycle Replica③
Building a Prince’s “Purple Rain” motorcycle Replica②
Building a Prince’s “Purple Rain” motorcycle Replica①

-English edition

執筆者：

comment

Your email address will not be published. Required fields are marked *

CAPTCHA


関連記事

Prince Purple Rain motorcycle replica Honda CM400T

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 3

I’m building a motorcycles for Prince “Purple Rain”（No. 3） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ From this time, we will proceed with the work to bring the exterior closer to the “Purple Rain” motorcycle. First, change the cowling from the current “Windjammer 4” to “Windjammer 2 or 3” and modify it. The original paint is removed and the corners are rounded.　Is the cowling material ABS?　Make a rough shape with FRP. I put a screw in the joint to reinforce it. Then put putty on the surface of FRP.　Also, in order to change the …

prince-purple-rain-motorcycle-honda-cm400-build

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 20

I’m building a motorcycles for Prince “Purple Rain”（No. 20） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ This time the sheet is complete. This time, I painted the diamond mark on the seat and covered the seat.   It turned bright red. Sew in a diamond shape.　Sew with the sponge in between. The surface was wrinkled. It’s behind the seat base. I sprayed it with a rust preventative. Add molding to the edges to prevent the sheet from tearing. Cover with vinyl to prevent water from entering. It is difficult to stretch the sheet. It’s …

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 13

I’m building a motorcycles for Prince “Purple Rain”（No. 13） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ Last time I made a sissy bar and cowling stay.　I installed a spacer because there was a gap between the sissy bar stay and the main body. Fits without gaps.　The sissy bar fitting is now complete.　After that, just send it to the plating shop. Cut the excess part of the cowl stay to give a sharp impression. Install headlights.　Ported from the conventional cowling. The shape of the light stay differs depending on the type of “Windjammer”.　The “Windjammer 4” …

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 11

I’m building a motorcycles for Prince “Purple Rain”（No. 11） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ This time, we processed the stay of the sissy bar and adjusted the mounting. Above is the previous state.　The shape is different from “Purple Rain”, so I made it with a new iron plate. I cut the previous stay by myself, but the shape was not good. The stay I made this time is sharper than before. It’s also lightweight. Drill holes for mounting. The main body is also cut a little so that the stay does not …

Building Prince’s Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan – No. 16

I’m building a motorcycles for Prince “Purple Rain”（No. 16） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ I’m going to start making sheets now.   I don’t have confidence in sheet production.　But I want to make it as I imagined it, so I will do my best to make it myself. Remodeled based on a used broken seat. As a result of thinking about what to do with the frame, I decided to make it a carbon pipe.　I bought it on Amazon. Fix the carbon pipe with FEP.　Mask the motorcycle so that the FRP does not …

PREV
Building Prince's Purple Rain Motorcycle Replica (Honda CM400T Custom) in japan - No. 1
NEXT
Building Prince's Purple Rain Motorcycle Replica (Honda CM400T Custom) in Japan - No. 3