Crafts experience

〜I built a motorcycle based on Prince's "Purple Rain" in Japan, so I'll show you the process of making it.〜

English edition

Build a Prince’s “Purple Rain” motorcycle CM400T in Japan（No. 21）~English edition~

投稿日：2026年3月3日 更新日：



I’m building a motorcycles for Prince “Purple Rain”（No. 21）

☆Click here for the First article ☆
☆Click here for the completed motorcycle☆

It’s been two years since I started making motorcycles, but this is the end.

This time I polished the exterior and installed the front screen.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Hand polish the abrasive.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Rough abrasive on the left.    Fine abrasive on the right

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Polished and cleaned.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Also polish the cowling.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

The scenery is reflected.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Correction of plating molding of cowling

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Install the front shield.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Cool！

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Wearing a seat made with difficulty.



 

～archive～
☆Click here for the completed motorcycle☆
Build a Prince’s “Purple Rain” motorcycle㉑
Build a Prince’s “Purple Rain” motorcycle⑳
Build a Prince’s “Purple Rain” motorcycle⑲
Build a Prince’s “Purple Rain” motorcycle⑱
Build a Prince’s “Purple Rain” motorcycle⑰
Build a Prince’s “Purple Rain” motorcycle⑯
Build a Prince’s “Purple Rain” motorcycle⑮
Build a Prince’s “Purple Rain” motorcycle⑭
Build a Prince’s “Purple Rain” motorcycle⑬
Build a Prince’s “Purple Rain” motorcycle⑫
Build a Prince’s “Purple Rain” motorcycle⑪
Build a Prince’s “Purple Rain” motorcycle⑩
Build a Prince’s “Purple Rain” motorcycle⑨
Build a Prince’s “Purple Rain” motorcycle⑧
Build a Prince’s “Purple Rain” motorcycle⑦
Build a Prince’s “Purple Rain” motorcycle⑥
Build a Prince’s “Purple Rain” motorcycle⑤
Build a Prince’s “Purple Rain” motorcycle④
Build a Prince’s “Purple Rain” motorcycle③
Build a Prince’s “Purple Rain” motorcycle②
Build a Prince’s “Purple Rain” motorcycle①

-English edition

執筆者：

comment

Your email address will not be published. Required fields are marked *

CAPTCHA


関連記事

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Build a Prince’s “Purple Rain” motorcycle CM400T in Japan（No. 4）~English edition~

I’m building a motorcycles for Prince “Purple Rain”（No. 4） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ This time, following the last cowling modification, we processed the gasoline tank.　The first step is to remove the paint on the gas tank. Pour zinc paint to prevent the gas tank from rusting. A special solvent is used to remove the paint. The paint will peel off immediately, so scrape it off with a scraper. After removing all the paint, put putty on the dented part and scrape it off. Also fill in the dent where the Honda …

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Build a Prince’s “Purple Rain” motorcycle CM400T in Japan（No. 22）~English edition~

Prince’s “Purple Rain” motorcycle (CM400T) has been completed!   finally! I got my dream Purple Rain motorcycle! ! ○＋〉　○＋〉　○＋〉　○＋〉○＋〉　○＋〉　○＋〉　○＋〉○＋〉　○＋〉　○＋〉　○＋〉○＋〉　○＋〉　○＋〉　○＋〉○＋〉　○＋〉!!　(^O^)／ I bought a CM400T after admiring Prince’s motorcycle riding scene, and finally realized what I wanted to do. To be honest, I was worried about whether it would be completed, but I will report that it has been completed safely.   Please take a look. It’s the kid motorcycle. For those who are seeing it for the first time, I did my best to make it. This article is the 22nd time. It’s finally completed after the 22nd time. Actually, I thought …

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Build a Prince’s “Purple Rain” motorcycle CM400T in Japan（No. 15）~English edition~

I’m building a motorcycles for Prince “Purple Rain”（No. 15） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ Continuation of cowling production.　Since the plating of the side blinker had deteriorated, I decided to put a plating sheet on it. Lightly sand the whole thing. I tried pasting the plated sheet, but the corner part can’t be pasted well.　Trial and error, but crumpled. I decided to give up the plated sheet and paint it with silver.　Scrape off the plated part to remove the step.　I use instant glue instead of putty. I blew primer, blew surfacer, and painted …

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Build a Prince’s “Purple Rain” motorcycle CM400T in Japan（No. 6）~English edition~

I’m building a motorcycles for Prince “Purple Rain”（No. 6）※painting failed. ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ I painted on a sunny day. However, the painting failed.　I failed, but I will introduce the process. I thought about various things to draw the symbol mark of Prince.　I cut it out using the “cutter compass”. I made a symbol mark using masking tape. It was difficult to cut out the round part. The shape of this symbol is slightly different between the “Purple Rain” photo and the bike on display at Paisley Park.　Maybe there are two. …

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Build a Prince’s “Purple Rain” motorcycle CM400T in Japan（No. 11）~English edition~

I’m building a motorcycles for Prince “Purple Rain”（No. 11） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ This time, we processed the stay of the sissy bar and adjusted the mounting. Above is the previous state.　The shape is different from “Purple Rain”, so I made it with a new iron plate. I cut the previous stay by myself, but the shape was not good. The stay I made this time is sharper than before. It’s also lightweight. Drill holes for mounting. The main body is also cut a little so that the stay does not …

PREV
Build a Prince's "Purple Rain" motorcycle CM400T in Japan（No. 20）~English edition~
NEXT
Build a Prince's "Purple Rain" motorcycle CM400T in Japan（No. 22）~English edition~