Crafts experience

〜I built a motorcycle based on Prince's "Purple Rain" in Japan, so I'll show you the process of making it.〜

English edition

Builds replica of Prince’s “Purple Rain” motorcycle CM400 in Japan（No. 4）

投稿日：2026年3月2日 更新日：



I’m building a motorcycles for Prince “Purple Rain”（No. 4）

☆Click here for the First article ☆
☆Click here for the completed motorcycle☆

This time, following the last cowling modification, we processed the gasoline tank.　The first step is to remove the paint on the gas tank.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Pour zinc paint to prevent the gas tank from rusting.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

A special solvent is used to remove the paint.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

The paint will peel off immediately, so scrape it off with a scraper.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

After removing all the paint, put putty on the dented part and scrape it off. Also fill in the dent where the Honda emblem will be attached and flatten it.　After that, spray the surfacer.

オイルレスコンプレッサー

This is the compressor I use all the time.

エアスプレーガン等

This is the spray gun I use all the time.

塗装用具

Other painting tools.

プラサフ

塗装用マスク

And the important thing is this painting mask.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

I sprayed the surfacer.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

There were still many dents, so I added putty again and scraped it off.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Next, make the side covers.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Strip the original paint.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

The side cover of “CM400E” had strong paint and was hard to scrape off.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

In order to bring the corners of the cowling closer to the ideal shape, we made modifications until we were satisfied.
Dig the edge with a chisel and paste the plating molding for automobiles on the edge.

 

プリンスパープルレイン　バイク　prince purplerain　motorcycle

It’s an ideal shape.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Spray the surfacer again.

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

プリンスパープルレイン　バイク　prince purplerain　motorcycle

Clean up. Don’t you think it’s close to the image of “Purple Rain”?



～archive～
☆Click here for the completed motorcycle☆
Build a Prince’s “Purple Rain” motorcycle㉑
Build a Prince’s “Purple Rain” motorcycle⑳
Build a Prince’s “Purple Rain” motorcycle⑲
Build a Prince’s “Purple Rain” motorcycle⑱
Build a Prince’s “Purple Rain” motorcycle⑰
Build a Prince’s “Purple Rain” motorcycle⑯
Build a Prince’s “Purple Rain” motorcycle⑮
Build a Prince’s “Purple Rain” motorcycle⑭
Build a Prince’s “Purple Rain” motorcycle⑬
Build a Prince’s “Purple Rain” motorcycle⑫
Build a Prince’s “Purple Rain” motorcycle⑪
Build a Prince’s “Purple Rain” motorcycle⑩
Build a Prince’s “Purple Rain” motorcycle⑨
Build a Prince’s “Purple Rain” motorcycle⑧
Build a Prince’s “Purple Rain” motorcycle⑦
Build a Prince’s “Purple Rain” motorcycle⑥
Build a Prince’s “Purple Rain” motorcycle⑤
Build a Prince’s “Purple Rain” motorcycle④
Build a Prince’s “Purple Rain” motorcycle③
Build a Prince’s “Purple Rain” motorcycle②
Build a Prince’s “Purple Rain” motorcycle①

-English edition

執筆者：

comment

Your email address will not be published. Required fields are marked *

CAPTCHA


関連記事

Builds replica of Prince’s “Purple Rain” motorcycle CM400 in Japan（No. 12）

I’m building a motorcycles for Prince “Purple Rain”（No. 12） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ Finally I was able to attach the cowling to the main body.　It took time to adjust the stay side. I made a spacer because the cowling and stay interfere.　Hard styrene material. I cut it out in the shape of the contact surface of the cowli I used 3 spacers. Adequate cushioning. I drilled a hole for the bolt. I put it between the cowling and the stay. The cowling and stay are attached with 4 bolts.　It’s made of …

Builds replica of Prince’s “Purple Rain” motorcycle CM400 in Japan（No. 15）

I’m building a motorcycles for Prince “Purple Rain”（No. 15） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ Continuation of cowling production.　Since the plating of the side blinker had deteriorated, I decided to put a plating sheet on it. Lightly sand the whole thing. I tried pasting the plated sheet, but the corner part can’t be pasted well.　Trial and error, but crumpled. I decided to give up the plated sheet and paint it with silver.　Scrape off the plated part to remove the step.　I use instant glue instead of putty. I blew primer, blew surfacer, and painted …

Builds replica of Prince’s “Purple Rain” motorcycle CM400 in Japan（No. 19）

I’m building a motorcycles for Prince “Purple Rain”（No. 19） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ From this time, it is the production of the epidermis of the seat.　It’s my first experience, so I’m not sure if it will work. It is a fake leather seat.  I bought a large size for motorcycles on Amazon. This fabric is thick enough and flexible. Roughly cut the sheet according to the seat base. Prepare a black string and double-sided tape. Place the string on the thin cloth and sandwich it with double-sided tape. It’s called a …

prince-purple-rain-motorcycle-honda-cm400-build

Builds replica of Prince’s “Purple Rain” motorcycle CM400 in Japan（No. 7）

I’m building a motorcycles for Prince “Purple Rain”（No. 7）※paint correction. ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ Last time I failed because the red was transparent.　Since the work time is limited, I masked the symbol mark and repainted it in purple. Rub the surface with a file. This is to improve the adhesion of the paint. Clean parts with dish soap. Mask only the symbol mark. I painted only the inside of the circle purple. Then paint the other parts purple. The cowling is also masked and painted purple. This is the stage before …

Builds replica of Prince’s “Purple Rain” motorcycle CM400 in Japan（No. 2）

I’m building a motorcycles for Prince “Purple Rain”（No. 2） ☆Click here for the First article ☆ ☆Click here for the completed motorcycle☆ Makes the CM400T closer to Prince’s “Purple Rain” motorcycle shape.　As for future work plans… ① Remove the rust from the frame and repaint. ② Remove the rust from the wheel and repaint it. ③ Lower the engine and overhaul the upper part. ④ Overhaul the front fork. ⑤ Modify the cowling to make it closer to the shape of “Purple Rain”. ⑥Repainting of the exterior This article will be from ①to ④. I painted the frame first.   …

PREV
Builds replica of Prince's "Purple Rain" motorcycle CM400 in Japan（No. 3）
NEXT
Builds replica of Prince's "Purple Rain" motorcycle CM400 in Japan（No. 5）